KX Five Series
KX Five Series
(Model Variants: K3X8 Five, K2X10 Five)
The HSM (High Speed Machining) concept, KX FIVE Series Machine enabling operations in 5 simultaneous axis, from r=roughing to finishing, of all types of complex work pieces. These fixed portal type 5-Axis machines combine high dynamics & accuracy to obtain high surface finish even during machining of complex contours & profiles. The table is equipped with TRIM technology inclined at 55⁰ plane allowing a tilting from -30⁰ to +180⁰ with a rotational speed of 50 rpm & 0.001⁰ incremental measuring. Machine is available with palletization device with variety of options in spindle according to application.
Features
Key Features
- Structure with fixed portal in ribbed cast iron with stiffness wall.
- Harmonically stable Machine for complex part machining.
- Table with integrated direct torque motor.
- Rotary tilting angle with negative angle in table.
- Large accessibility from the top.
- Incremental measurement by optical encoders.
- Powerful & precise high speed electro spindle.
- Efficient chip disposal.
- Electrical with quality device & panel AC.
- Auto & manual coolant.
- Centralized & programmable lubrication.
Simultaneously 5 Axis Machine
Bridge Type Structure
High Speed Machine
TPM friendliness
High Speed Electro Spindle
Technical Specification
| K3X8 Five | K2X10 Five | ||
| Linear Axia X/Y/Z | |||
| Travels | inch (mm) | 30.7x27.5x19.6 (780x700x500) | 35.4x35.x19.6 (900x900x500) |
| Rapid Feedrates | inch /min (m/min) | 1968.5 (50) | |
| Acceleration on Axis | inch/s2 (m/s2) | 1.97 (5) | |
| Structure | |||
| Tilting Axis - A | +30/-180° | +45/-180° | |
| Rotation Speed A - Axis | rpm | 50 | 40 |
| Rotation Axis - C | 360° | 360° | |
| Rotation Speed C - Axis | rpm | 50 | 90 |
| Working Positioning | Horizontal Position = 0 | Horizontal Position = 0 | |
| (Angle Spindle Axis / Table) | Vertical Position = 90 Inclined = -20 | Vertical Position = 90 | |
| Table | |||
| Table Area | inch (mm) | 19.68 (500) | 24.80 (630) |
| Admissible Load on Table | lb (kg) | 551 (250) | 1102 (500) |
| Distance from Spindle nose to table top | inch (mm) | 20.66 (525) | 27.55 (700) |
| Spindle | |||
| Rotating Speed | rpm | 18000 | |
| Tool Taper | HSK 63A | ||
| Power- Torque (S6-40%/S1) | hp-ft-lb (kW-Nm) | 35.8-81.1/61.9 (26.7-110/84) | |
| Characteristic Speed | rpm | 3400 | |
| Tool Magazine | |||
| Pocket Quantity | 30 | 30 | |
| Max.Tool Length | inch (mm) | 9.84 (250) | 11.81 (300) |
| Tool Diameter | inch (mm) | 3.54 (90) | 3.54 (90) |
| Max. Tool Weight | lb (kg) | 15.4 (7) | 17.6 (8) |
| Accuraccies | |||
| Positioning Uncertainty (P) | Linear axes X-Y-Z : 4micron-Rotating axes A-C : 7.2 sec | ||
| Repeatability (Ps medium) | Linear axes X-Y-Z : 2micron-Rotating axes A-C : 3.6 sec | ||
| Coolant | |||
| Flow-Pressure | gal/min (l/min) | 7.92-3 (30-3) | |
| Tank Capacity | gal (liters) | 60.7 (230) | |
| Over-all Dimension | |||
| Length/Width/Height | inch (mm) | 106/185/131 (2690/4710/3320) | 138/193/137 (3510/4910/3470) |
| Machine Weight | lb (kg) | 22046 (10000) | 31967 (14500) |
** Depends upon Work holding devices, Tooling and Job.
