5-Axis high performance multi function machining centre offer high level of flexibility enabling machining operations in 5 sides in one setup from roughening to finishing, as well as turning operations. Structure with portal configuration and modular design allow maximum flexibility in machine configuration to adapt to the mechanical requirement. Table equipped with torque motor on a 45° plane allowing tilting from -45° to +180°.
Linear Axis X/Y/Z | MX 4 | |
Travel | mm | 750/700/500 |
Rapid Feedrate | m/min | X = 60, Y-Z = 120 |
Acceleration on Axis | m/s2 | X = 6, Y-Z = 10 |
Rotating Axis on Table A-C | ||
A :Tilting on 45° plane | Deg. | -45°/+180° |
C :Rotating Table | Deg. | 360° |
Working Position | Deg. | Horizontal Position = 0° Verticle Position =90° |
Area | mm | ø440 |
Admissible Load | kg | 250 |
Rotating Speed | rpm | 100 |
Torque :Motor/Clamping | Nm | A=740, C=430/A,C -2500 |
Spindle | ||
Rotating Speed | rpm | 24000 |
Taper | HSK 63A | |
Power (S6/S1) | kW | 25/20 |
Torque (S6/S1) | Nm | 40/32 |
Characteristic Speed | rpm | 6000 |
Accuracy | ||
Linear Axis (X/Y/Z) | ||
Positioning Uncertainty (P) | mm | 4 |
Repeatability (Ps medium) | mm | 2 |
Rotating Axis (A/C) | ||
Positioning Uncertainty (P) | sec | 7.2 |
Repeatability (Ps medium) | sec | 3.6 |
Tool Magazine | ||
Pocket Qty. | 36 | |
Tool Length | mm | 250 |
Tool Diameter | mm | 70 |
Tool Weight | kg | 5 |
Coolant | ||
Flow-Pressure | l/min-bar | 30-3 |
Tank Capacity | Ltr. | 250 |